3 Way Butterfly Valve Use in Industry

Numerous industrial factories and designs consist of a basic frame that includes pipes of some sort. These pipes allow different process media to be transferred throughout the system. Generally these medias are in the form of gases or liquids, and the movement of those materials is often crucial for the overall purpose and production of the factory.

The volume of process media moving through the pipes of any industrial factory is regulated and controlled through the use of valves. One of the options for these valves is the 3 Way Butterfly Valve. A butterfly valve is able to control volume flow through pipes by adjusting a disk so that it either blocks flow or allows passage. This disk is controlled by an actuator, which is connected to the disk by the valve shaft. A simple rotation motion allows the disk to be positioned in the proper place for the desired flow control. 

The three-way butterfly valve consists of two butterfly valves connected to a carbon steel, stainless steel, or cast iron T. One of the valves has an actuator attached to it, which is then connected to the other valve by a chain drive or a linkage. The valves can then move in tandem while actuator is being operated.

One of the primary advantages of installing a 3 Way Butterfly Valve is the fact that it can be quickly manipulated and controlled. Every machine needs to employ a quick-stop mechanism that will stop flow and operation immediately in the event of any problem or emergency. A 3 Way Butterfly Valve can quickly respond to a command, and cease operation abruptly.

Additional advantages of implementing 3 Way Butterfly Valves into factory systems include the fact that these valves are often cheaper than other types of valves that are available. For businesses that are constantly working to juggle expenses, profits, and the installation of responsive and reliable parts, butterfly valves might hold the best solution for those needs.

The particular application and use of the valve must be considered in the context of the entire system before it is purchased. A 3 Way Butterfly Valve is generally lighter than other kinds of valves. This results in a lower support requirement in valve installation and operation. Of course, different types of butterfly valves are also available for companies to consider. They are made out of different materials, and intended to function within a range of pressure applications. A 3 Way Butterfly Valve can also be purchased in a variety of different sizes, and a particular size can be specially ordered for an intended use.

In a system where it is desired for some pipes to operate separately from other ones, lug-style butterfly valves are most appropriate. These types of butterfly valves are threaded in a way that allows them to be installed without any bolts or nuts. After successful installation of a lug-style butterfly valve, one portion of a whole piping system could be stopped, disconnected, and controlled at a different rate without having an impact on any other portion of the system.

Factories have a wide variety of butterfly valve options available to them, and the flexibility to select one that is most appropriate for their purposes.

Request a Quote